• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

You might need the key fob to be programmed by an auto locksmith or Subaru find My keys dealer, depending on how old your subaru keys is. This is typically accomplished by connecting a programming machine to the computer in the car.

To program your Subaru begin by unlocking the driver's side door using the door button control, then close it. You will hear a chime and see the dome lights flashing in the instrument panel.

Step 1: Locate your transmitter circuit board

There are several ways to program your key fob. First, you need to know which kind of key fob you have. This can be accomplished by looking at the shape of the key fob or by listening to the siren in your car.

Once you have the necessary information, you can start the process of programming your key fob from home. You'll require an aluminum flathead and a key to complete this. You can open the key fob by twisting it. The key is inserted into the case. Then let go of the battery by pressing the tabs holding it in place. Replace the battery with a new one, and then put the key fob case back together.

Step 2: Disconnect the key fob case

It is a good idea to change the battery of key fobs if they are not working. However, there are some situations where the buttons on the key fob could be broken. If you notice the metal contacts on the button have come loose Try the process of re-soldering them to make them work again.

Make sure you turn off your ignition and close your doors before you begin. You can do this by closing the driver's door and pressing the door button ten times in rapid succession. After that, you'll hear the instrument panel chime and your dome lights will blink. This means you're ready to proceed.

Step 3: Insert the key fob into the ignition

There are lots of articles online that give you the steps to program a new or replacement car keys subaru Subaru key fob at home, but the majority of them aren't very specific. A professional auto dealer or locksmith in Fort Bliss is the best option to reprogram an electronic car key.

Sit in the driver's seat of your Subaru with the engine off and the doors shut. You can open the door button control and use it to unlock all doors. Open and close the driver’s door three times. Inject and remove the ignition key (don't rotate it) 10 times in 40 seconds. The system should sound chirps to confirm that the settings have been altered.

Step 4 Step 4: Turn on the ignition

Before you begin this process of programming your key fob, it is important to keep in mind that this procedure only works with a functioning key already. If you don't an auto-locksmith or a dealer will be required to program the key fob for your Subaru Fort Bliss.

Once the key is programmed, it should be able to start your vehicle within about five minutes. Start by closing the doors and then shutting off the engine. Sit in the driver's seat and open all doors by pressing the door button. Place the key into the ignition then turn it on to the off position (the electrical systems will turn on, but the engine is off) then return to the off position ten times in rapid succession.

Step 5 Step 5: Lock the driver's Door

subaru key programming offers a wide range of luxury automobiles with key fobs that lock and unlock doors, turn on the engine, and defrost windows. These devices may stop functioning.

To fix this problem then you should contact a locksmith or the dealer. This will fix the problem and ensure that your car is safe.

First, you must open and close the door on the driver's side. Place the key into the ignition and then turn it back to position 1. Then, turn it back to the off position. Do this as quickly as you can ten times. After the tenth repetition, you will hear a chime.

Step 6: Press the Lock/Unlock Button on the Driver's Door

If you are looking to replace the battery in the Subaru key fob, the process is simple. First, you must open the exterior fob casing. Use a flathead for prying the case's interior open and then remove the batteries that were in there.

After removing the old battery, replace it with the new one and close the case. Assume a seat in the driver's chair and open all doors using the door-button control. Place the key in ignition and turn it so that the electric system is switched on, but the engine remains off. Repeat this 10 times until you hear the chime on the instrument panel. This will put the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

For some owners, the annoying sound heard when locking or unlocking a Subaru key fob from outside can become distracting. In some instances you can deactivate the chirp by closing and opening all doors while double-clicking lock button on the key fob.

Close all doors including the lid for the fuel-filler, and turn off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. When this is done, the instrument panel emits an audible chime. The chirp signals that the lid of the fuel filler and door are locked. It is possible to change the setting so that the doors lock automatically and without having to push a switch.

Step 8 Step 8: Enter your 8-digit Transmitter Number

Keep the first 8-digits in your mind. Then, sit in the driver's chair, close the doors and turn the ignition to the first position. After 10 turns, your instrument panel should chime once.

Then, open the key fob case and locate the circuit board for the transmitter inside. There will be one or two sets of numbers (8-digits) on the circuit board. Follow the steps in the guide to register the code. This process may require visiting the dealer for older models.